How To Use Xbox Controller For Project 64

Download Article

This wikiHow teaches you how to ready an Xbox 360 controller for use with the Project64 emulator program on a Windows calculator. For this to work, you must have either a hard-wired Xbox 360 controller or a wireless adapter from Microsoft.

1

Unplug your Xbox 360. If you have an Xbox 360 within connectedness range, unplug information technology from its power source to preclude your controller from connecting accidentally to the console.
two
Make sure that you take a wired controller. In order to use an Xbox 360 controller on Project64 without an adapter, the controller must use a non-removable wire as its ability source.^[1]
- You cannot use a "plug and charge" cablevision here.
- If you desire to utilize a wireless controller, you'll have to buy a Microsoft Xbox 360 Wireless Gaming Receiver unit of measurement. If so, brand sure that the receiver is from Microsoft and not a third-party retailer.
Advertisement
3
Plug into the computer your controller. The stop of the controller's wire should fit into one of your computer's USB ports.
- If you lot're using a wireless receiver, plug the receiver into a USB port and wait for a light-green light on the receiver. The receiver must be plugged into a "powered" USB port, then effort a dissimilar USB port if the receiver's light doesn't show upwardly.
4
Look for the drivers to end downloading. Upon plugging in your controller or receiver, Windows will automatically wait for and download software to assistance your computer use the controller. This should only take a few minutes, after which point you'll receive a notification that your controller is set up to employ.
- You lot will need an Internet connexion for this process to start.
five
Connect your controller. Skip this step if you're using a wired controller. Press the circular Connect button on the wireless receiver, then turn on the controller by pressing and holding the Guide button, which is the Xbox logo in the middle of the controller, and press the "Connect" push button on the front of the controller.
- Once the controller'south Guide push button stops blinking, your controller is connected to the computer.

1

Open up Project64. Double-click the Project64 app icon, which resembles a green, stylized "PJ" next to a small, carmine "64" icon.
2

Click Options . This tab is at the top of the window. A driblet-down menu will appear.
3

Click Configure Controller Plugin… . Information technology's near the lesser of the drop-down carte. Doing then opens the controller settings window.
four
Look for a controller's image. If you see a large paradigm of a controller in the middle of the page, your controller is showing up on Project64; if not, try restarting Project64.
- If restarting Project64 doesn't work, restart your computer and so try to connect again.
5

Change the controls. To map an activeness to a different push button on the controller, click the activeness's name to the left of the keyboard button, then press the button that you want to utilise for that activeness on your controller.
vi
Save your controller configuration. Click Save Contour at the acme of the window, enter a proper noun for the configuration, and click Save. You'll be able to load the saved settings by re-opening the Configure Controller Plugin... carte du jour, clicking Load Contour, and double-clicking the saved settings file.
- It'southward helpful to save your controller'south profile equally something identifying (e.g., the proper name of the game with which you want to use the controller's specific controls).

Add together New Question

Question

What can I practise if I am unable to configure the analog properly?

The mouse tends to activate if you keep moving it while trying an input. If you agree your mouse still after clicking the side by side section, this should provide ample time to then put both of your analog motions. Older versions of PJ64, like PJ64k tend to take problems with registering the right analog stick. Either learn to deal without, or update your electric current version of PJ64.
Question

How tin you relieve your controller configurations?

In all versions of PJ64 (even PJ64k) get to Options > Configure Controller Plugin > Save Contour. A window should pop-up indicating the file location where y'all would like to put your controller configurations may be loaded up later with Options > Configure Controller Plugin > Load Profile from that file location. In later on versions of PJ64 like 2.three.2 an option exists at the bottom called Save. This won't save the controller configurations to the calculator just will save it to PJ64 instead The next time you open information technology on your computer. If you lost your default configurations, you can use Options > Configure Controller Plugin > Default Configuration and click Save.
Question

What nearly for the newer versions of Project 64? This doesn't work for those.

Really it does! PJ64 2.three.2 automatically finds your joypad (Xbox360 controller, etc.). The correct analog stick is available. Only be conscientious and stop your mouse movements when inbound your configurations, and you should be fine to enter your joypad's (Xbox360) buttons.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Project64 often has problem identifying controllers when it is running while connecting the controller. For best results, connect the controller, so open Project64.

Project64 is not available for Mac computers.
Downloading ROMs for games that you lot don't already own is both generally illegal and confronting Nintendo's terms of use.

About This Article

Commodity Summary X

1. Connect controller to Xbox.
2. Open Project64.
3. Click Options.
4. Click Configure Controller Plugin.
5. Map deportment to controls.
six. Click Save Contour.
7. Enter a name for the configuration.
viii. Click Save.